9Pcs MQ2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module

9Pcs MQ2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module

  • Model: mod0068
  • Units in Stock: 100

Price:   $23.39

4 reviews            
Add to Cart:
Details
Reviews
    Details:

    Product Description

    9Pcs MQ2 MQ-3 MQ-4 MQ-5 MQ- MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module For Arduino

    Feature:

    MQ-2: Detection concentration: 300-1000ppm(combustible gas).

    MQ-3: Used in motor vehicles and other no drunken drivers homework personnel on-site testing, also used in other places of ethanol vapor detection.

    Feature: Size: 32 x 22 x 27mm Main chip: LM393, ZYMQ – 3 gas sensors Working voltage: DC 5V 1, With a signal output instructions. 2, Two-way signal output (TTL level output and analog output) 3, TTL output signal for low level effectively.(when the low output electric signal lights at ordinary times, can be directly by single chip microcomputer) 4, Analog 0 – 5V voltage, the higher the concentration, the higher the voltage. 5, To ethanol steam has a high sensitivity and good selectivity. , In June and has long service life and reliable stability. 7, Rapid response recovery features.

    MQ-4:

    1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions; 2, With a DO switch signal (TTL) output and AO analog signal output; 3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module) 4, The analog output voltage, the higher the concentration the higher the voltage. 5, Methane, natural gas has better detection sensitivity. , There are four screw holes for easy positioning; 7, Product Dimensions: 32 (L) * 20 (W) * 22 (H) 8, With a long service life and reliable stability 9, Rapid response and recovery characteristics   Electrical properties: Input voltage: DC5V power (current): 150mA DO output: TTL digital 0 and 1 (0.1 and 5V) AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

    MQ-5:

    Suitable for home or industrial on LPG, natural gas, coal gas monitoring devices. Excellent resistance to alcohol, smoke interference.

    Module Features: 1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions; 2, With a DO switch signal (TTL) output and AO analog signal output; 3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module) 4, The analog output voltage, the higher the concentration the higher the voltage. 5, For gas, natural gas has better detection sensitivity. , There are four screw holes for easy positioning; 7, Product Dimensions: 32* 20 * 22 8, With a long service life and reliable stability 9, Rapid response and recovery characteristics   Electrical properties: Input voltage: DC5V power (current): 150mA DO output: TTL digital 0 and 1 (0.1 and 5V) AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

    MQ-:

    Suitable for domestic or industrial on LPG (liquefied petroleum gas), butane, propane, LNG (liquefied natural gas) detection devices. Excellent resistance to ethanol vapor, smoke interference.

    Module Features: 1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions; 2, With a DO switch signal (TTL) output and AO analog signal output; 3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module) 4, 0 ~ 5V analog output voltage, the higher the concentration the higher the voltage. 5, The propane, butane, LPG, LNG has a good detection sensitivity. , There are four screw holes for easy positioning; 7, Product Dimensions: 32 (L) * 20 (W) * 22 (H) 8, With a long service life and reliable stability 9, Rapid response and recovery characteristics   Electrical properties: Input voltage: DC5V power (current): 150mA DO output: TTL digital 0 and 1 (0.1 and 5V) AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

    MQ-7:

    For home, carbon monoxide detection device environment. Suitable for carbon monoxide and gas detection.

    Module Features: Detection of concentration: 10-1000ppmCO Loop voltage Vc: <=10V DC Heater voltage Vh: 5.0V ±0.2V  ACorDC(high) Load resistance: adjustable. Heater  resistance RH: 31ohm ± 3 ohm(room temperature) Heater power consumption PH: <=350mW

    Standard test conditions: Temperature: 20 degree ± 2 degree Humidity: 5 ± 5 RH Standard test circuit: Vc: 5.0V ± 0.1V; Vh(high):5.0V±0.1V                                    Vh(low):1.5V±0.1V

    1, The analog output voltage, the higher the concentration the higher the voltage. 2, The carbon monoxide detection with better sensitivity. 3, There are four screw holes for easy positioning; 4, Product Dimensions: 32 (L) * 20 (W) * 22 (H) 5, With a long service life and reliable stability , Rapid response and recovery characteristics   Electrical properties: Input voltage: DC5V power (current): 150mA DO output: TTL digital 0 and 1 (0.1 and 5V) AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

    MQ-8:

    Suitable for domestic or industrial hydrogen leak on a monitoring device. Are not subject to ethanol vapor, soot, carbon monoxide and other gases interference.

    MQ-9:

    For home or factory gas leak detection device, suitable for carbon monoxide, combustible gas monitoring device.

    Can test carbon monoxide: 10 to 1000ppm CO Combustible gas range: 100 to 10000ppm

    Module Features: Loop voltage Vc: <=10V DC Heater voltage Vh: 5.0V ±0.2V  ACorDC Heater resistance: 31 ohm ± 3 ohm(room temperature). Heater power consumption PH: <=900mW Standard test conditions: Temperature: 20 degree ± 2 degree Humidity: 5 ± 5 RH Standard test circuit: Vc: 5.0V ± 0.1V                                    Vh:5.0V±0.1V Warm up time: more than 48 hours.

    MQ-135:

    MQ135 gas sensor is sensitive material used in clean air, low conductivity tin dioxide (SnO2). When the sensor is kept in their environment The contaminated gas, the conductivity of the sensor with the air pollution gas concentration increases. Using a simple circuit can be changes in the conductivity Of the concentration of the gas is converted to the corresponding output signal. MQ135 sensor for ammonia, sulfide, benzene vapor high sensitivity, smoke and other harmful monitor is also very satisfactory. This sensor can detect a Measuring a variety of harmful gases, is a low-cost sensors for a variety of applications.

    Module Applications: For home, environmental harmful gas detection device, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas sensors tested concentration range: 10 to 1000ppm.

    Module Features: Loop voltage Vc: <=24V DC Heater voltage Vh: 5.0V ±0.2V  ACorDC Load resistance: Adjustable Heater resistance: 31 ohm ± 3 ohm(room temperature). Heater power consumption PH: <=900mW Sensitive body surface resistance Rs:2K ohm – 20K ohm(in 100ppm NH3) sensitivity S: Rs(in air)/ Rs(100ppmNH3)>=5 Standard test conditions: Temperature: 20 degree ± 2 degree Humidity: 5 ± 5 RH Standard test circuit: Vc: 5.0V ± 0.1V                                       Vh:5.0V±0.1V Warm up time: More than 48 hours.

    Connection: Click here to open


    Package included:

    1 x MQ2 1 x MQ-3 1 x MQ-4 1 x MQ-5 1 x MQ- 1 x MQ-7 1 x MQ-8 1 x MQ-9 1 x MQ-135 2 x Dupont cable

    Customer Reviews:

    Displaying 1 to 4 (of 4 reviews)

     
    by f***n
    Date Added: 09/16/2021
    good!!

    Rating: 3 of 5 Stars [3 of 5 Stars]

    by s***0
    Date Added: 09/16/2021
    nice

    Rating: 5 of 5 Stars [5 of 5 Stars]

    by g***r
    Date Added: 09/18/2021
    Nice

    Rating: 4 of 5 Stars [4 of 5 Stars]

    by p***1
    Date Added: 09/16/2021
    Good

    Rating: 4 of 5 Stars [4 of 5 Stars]

    Displaying 1 to 4 (of 4 reviews)

     

    Important Information Zen Cart® and Zen Ventures, LLC assumes no responsibility for the content or effect of these addons or files. No representation is made with respect to their use or suitability for your website. Installing any addons to your site has a direct effect on your site's PCI compliance. You must self-certify all addons you install, in addition to all other customisations you make to your site. Use at your own risk!We must admit that our way of life depends on quality of different goods of popular brands. Many of our clients were surprised by the incredible assortment of products in our store. You know, we have many devoted customers all over the world, and this fact proves that we sell only quality commodities

    Your page text goes here

Similar Products Featured


Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product.



Shipping Estimator
Your Cart is Empty