Supstronics X205 Expansion Board For Raspberry Pi 2 Model B / Ra

Supstronics X205 Expansion Board For Raspberry Pi 2 Model B / Ra

  • Model: mod0060
  • Units in Stock: 97

Price:   $61.83

0 reviews            
Add to Cart:
Details
Reviews
    Details:

    Product Description

    Supstronics X205 Expansion Board For Raspberry Pi 2 Model B / Raspberry Pi B+

    Key Feature:  
    Input Voltage  – V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
    RS232 serial  communications  – Control the Raspberry Pi over RS232 or connect to external serial accessories 
    RS485 serial  communications  – You will be able to have a communication port for your field bus directly connected to your RPi!  – It will allow up to 32 devices to communicate through the same data line over a cable length of up to    4,000ft with a maximum data rate of 10Mbit/s.
    Audio  – 3.5mm MIC in jack   – 3.5mm stereo audio jack  – Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)

    Wireless

     – WiFi (IEEE 802.11b/g/n) with external antenna   – IR sensor (38KHz)

    USB Storage  – Self-powered USB hub with 3 ports

    Real-time clock (RTC)  –  Based on DS3231SN with included CR2032 battery

    GPIO Control

     – 8-channel Darlington driver chip  () allowing to control electronic circuits which require more    current
    Misc  – Power output socket   – Camera flex slot 

    so camera can still be used with the expansion  board attached

     – DIP switch to remove connection from RPi’s pin header

     – Directly connected on top of the Raspberry Pi using the board GPIO header pins   – No wiring nor soldering is required   – Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards   – 

    Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B 

    NEW!

    Dimensions

     – 85 x 5mm (Same size as Raspberry Pi)

       

    Please refer to


    Package included:

    1 x X205 expansion board
    1 x USB adapter
    1 x 2.4GHz WIFI antenna
    4 x nylon spacers (M3 x 20mm)
    8 x nylon screws  (M3 x mm)


    Important Information Zen Cart® and Zen Ventures, LLC assumes no responsibility for the content or effect of these addons or files. No representation is made with respect to their use or suitability for your website. Installing any addons to your site has a direct effect on your site's PCI compliance. You must self-certify all addons you install, in addition to all other customisations you make to your site. Use at your own risk!We must admit that our way of life depends on quality of different goods of popular brands. Many of our clients were surprised by the incredible assortment of products in our store. You know, we have many devoted customers all over the world, and this fact proves that we sell only quality commodities

    Your page text goes here

Similar Products Featured


Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product.



Shipping Estimator
Your Cart is Empty